Connecting Wires To Terminals - Kenwood KDC-M4524 Bedienungsanleitung

Connecting Wires to Terminals

To Steering remote (Blue/Yellow)
(Optional Accessory)
Connector Function Guide
Pin Numbers for
Cable Color
ISO Connectors
External Power
Connector
A–4 Yellow
A–5 Blue/White
A–7 Red
Black
A–8
Speaker
Connector
Purple
B–1
B–2 Purple/Black
B–3 Gray
B–4
Gray/Black
B–5
White
B–6
White/Black
B–7
Green
B–8
Green/Black
KENWOOD disc changer input
To connect the Disc changer, consult your
Disc changer manual. 15
Fuse (10A)
Functions
Battery
Power Control
Ignition (ACC)
Battery wire (Yellow)
Earth (Ground)
Connection
Ignition wire (Red)
Rear Right (+)
Rear Right (–)
Front Right (+)
Front Right (–)
A–4 Pin (Yellow)
Front Left (+)
Connector A
Front Left (–)
Rear Left (+)
Connector B
Rear Left (–)
10
Rear left output (White)
14
REAR
REMO.CONT
13
Wiring harness
(Accessory1)
17
TEL mute wire (Brown)
6A
If no connections are made,
do not let the wire come
7A
out from the tab.
See page 29 30
Power control/ Motor
antenna control wire
(Blue/White)
A–7 Pin (Red) 8
9
8 6 4 2
7 5 3 1
8 6 4 2
7 5 3 1
— 28 —
Rear right output (Red) 4
Antenna Conversion Adaptor
(ISO–JASO) (Accessory3)
L
Antenna Cord (ISO)
R
FM/AM antenna
input 3
16
Connect to the terminal that is
grounded when either the
TEL MUTE
telephone rings or during
conversation. 21
To connect the
KENWOOD navigation
system, consult your
navigation manual.
18a
Connect either to the power
20
control terminal when using
P.CONT
the optional power amplifier,
ANT.CONT
or to the antenna control
terminal in the vehicle.
2
1
22
23