Speaker Preparation - Sharp HT-SB400 Bedienungsanleitung

Speaker preparation

Make sure to unplug the AC power lead before installing
the speaker or changing the position.
Select from three installation methods according to the preferred
position.
Using spikes
You may choose from the two different spike lengths provided:
25 mm and 30 mm.
Nuts (secured on 30 mm spikes) must be used when installing
either the 25 mm or 30 mm spikes.
The speaker can be leveled by adjusting the spikes and nuts.
ON/STAND-BY ON/STAND-BY NEWS NEWS CINEMA/GAME CINEMA/GAME SPORT SPORT
Option 2
Notes:
Option 1 or option 2 indicates spike positions based on LCD
TV stand.
When attaching the spikes, place the speaker on a cushion or
soft cloth to avoid damage.
Caution:
When using these spikes on glossy or slippery table such as on
glass top, stick foot cushions at the bottom of the spikes to avoid
slippage.
STANDARD STANDARD FUNCTION FUNCTION VOL VOL VOL VOL
SOUND BAR SYSTEM HT-SB400 SOUND BAR SYSTEM HT-SB400
Option 1
Tighten all spikes as shown
Using foot cushions
ON/STAND-BY ON/STAND-BY NEWS CINEMA/GAME NEWS CINEMA/GAME SPORT SPORT STANDARD STANDARD
Attach foot cushions as shown
Note:
Option 1 or option 2 foot cushion positions based on LCD TV
stand.
FUNCTION FUNCTION VOL VOL VOL VOL
SOUND BAR SYSTEM HT-SB400 SOUND BAR SYSTEM HT-SB400
Option 2
Option 1
HT-SB400
ENGLISH
E-6