Inhaltsverzeichnis
Werbung
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes for
product improvement without prior notice. The performance
specification figures indicated are nominal values of production
speaker. There may be some deviations from these values in
individual speaker.
General
Power source
DC IN 12V
(AC 100 - 240 V ~ 50/60 Hz)
Power
Power on: 12 W
consumption
Power Stand-by: 0.6 W (*)
Output power
Front Speaker:
RMS: 10 W (5 W + 5 W) (10% T.H.D.)
RMS: 9.6 W (4.8 W + 4.8 W) (0.9% T.H.D.)
Centre Speaker:
RMS: 7 W (10% T.H.D.)
RMS: 6.5W (0.9% T.H.D.)
Subwoofer:
RMS: 15 W (10% T.H.D.)
RMS: 9.8 W (0.9% T.H.D.)
4A: AC/DC adaptor
Speaker
3.1-way Speaker System
Front Speakers: 40 mm (1-9/16") Full Range (x 2)
Impedance: 12 ohms / Channel
Centre Speakers: 40 mm (1-9/16") Full Range (x 2)
Impedance: 6 ohms
(12 ohms x 2 parallel connections)
Subwoofer: 57 mm (2-1/4") Woofer (x4)
Impedance: 3 ohms
(12 ohms x 4 parallel connections)
Audio output
Subwoofer Pre Out: 10 k ohms
terminals
Input terminals Analogue input (LINE 1): RCA type x 1pair (L/R)
500 mV/47 k ohms
Analogue input (LINE 2): Stereo mini jack Ø 3.5 mm
100 mV/47 k ohms
Dimensions
Width: 985 mm (38-3/4")
Height: 96 mm (3-3/4")
Depth: 70 mm (2-3/4")
Weight
2.15 kg (4.74 lbs.)
(*) This power consumption value is obtained when in the touch sensing off
mode (RED).
HT-SB400
ENGLISH
E-18
Werbung
Inhaltsverzeichnis
