CAME BPT TH/500 Montage- Und Betriebsanleitung Seite 45

Window contact
(only on battery-powered model)
If you have chosen to connect to the terminals
a window contact D (
can set it so that the thermal zone is turned
off thirty seconds after the window in which
the contact is fitted is opened.
D
Note. When the window is closed again, the
thermal zone goes back to the mode prior
to its activation.
Press the button to move on to the next
parameter to be configured.
Back-lighting of display
(only on mains-powered model)
Using the
the back-lighting should always be on (ON)
or only when the display is touched.
Press the button to move on to the next
parameter to be configured.
E
Adjusting display brightness
Change the screen brightness using the
arrows F.
OO= Back-lighting always off.
Press the button to move on to the next
parameter to be configured.
F
Buttons beep
Choose whether to activate/deactivate the
buttons beep using the
Press the button to move on to the next
parameter to be configured.
G
), you
arrows E, choose whether
arrows G.