CAME BPT TH/500 Montage- Und Betriebsanleitung Seite 43

Note. If the external probe is set as the main probe, the temperature it detects is shown on the display and
used as a reference for the operation of the heating/cooling system. The temperature detected by the device's
internal probe cannot be seen on the display.
Setting the unit of measurement
for the temperature
Choose the unit of measurement for the
temperature using the
Press the button to move on to the next
parameter to be configured.
A
Use of terminals
(only on battery-powered model)
Choose the function associated with the termi-
nals using the
= compatible remote probe
= telephone contact
B
= window contact
Choice of main probe
(only on battery-powered model)
If you have chosen to connect to the terminals
an external probe (
ing the button will make the screen in
figure C appear.
C
Using the
the function that the external probe must
carry out:
= Secondary probe
= Main probe
arrows A.
arrows B from:
), press-
arrows you can choose