Technische Daten; About This Documentation; Notes On Safety - Aventics AS1 Betriebsanleitung

AVENTICS | AS1 / AS2 / AS3 / AS5 | R412013436–BAL–001–AE | Deutsch/English

11 Technische Daten

Maximal zulässiger Druck, Temperaturbereich und
Gewindeanschluss sind auf den Produkten angegeben.
Die Einbaulage ist senkrecht.
Allgemeine Daten
Mediums-/ Umgebungs-
temperatur min./max.
Weitere technische Daten entnehmen Sie bitte
dem Online-Katalog unter
www.aventics.com/pneumatics-catalog
-10 °C /+50 °C
English
1

About this documentation

These instructions contain important information for the safe
and appropriate assembly and commissioning of the product.
O
Read these instructions carefully, especially the section
"Notes on Safety", before working with the product.
Additional documentation
O
Also follow the instructions for the other system components.
O
Furthermore, observe general, statutory and other binding
rules of the European and national laws, as well as the valid
regulations in your country to protect the environment and
avoid accidents.
Presentation of information
Safety instructions
In this document, there are safety instructions before the steps
whenever there is a danger of personal injury or damage to the
equipment. The measures described to avoid these hazards must
be followed.
Structure of warnings
Type and source of risk
Consequences of non-observance
O
Measures to avoid these hazards
Meaning of the signal words
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Symbols
Operation may be impaired if this information
is disregarded.
2

Notes on safety

The product has been manufactured according to the accepted
rules of current technology. Even so, there is a risk of injury or
damage if the following general safety instructions and the specific
warnings given in this instruction manual are not observed.
O
Read these instructions completely before working with the
product.
O
Keep these instructions in a location where they are accessible
to all users at all times.
O
Always include the operating instructions when you pass
the product on to third parties.
SIGNAL WORD
CAUTION
5