Specifications; Product Description; Installation - ZAMEL VO-802B Bedienungsanleitung

SPECIFICATIONS

• Two-home entrance panel
• Surface-mounted
• Vandal-resistant zinc alloy housing
• 800 TVL resolution
• ¼" CMOS colour camera
• Night-time IR illumination
• NO/NC catch control

PRODUCT DESCRIPTION

FRONT BACK

INSTALLATION

Tekst
150cm
1. Use the wiring connection diagram and verify that all wiring connections are correct.
2. Choose a suitable location in which to install the entrance panel. An installation height
between 1.5 and 1.6 m above the ground is recommended.
3. The entrance panel video camera should be away from direct sunlight and deep
shadows.
4. Verify that the power supply voltage is OFF before wiring the device.
5. Switch on the supply voltage of the device when completely installed.
6. Seal the back plate edges of the entrance panel of the complete installation surface with
a waterproof silicone product during the installation. This will prevent condensation
occurring between the entrance panel and its installation surface in certain weather
conditions. Condensation on the surfaces causes a risk of corrosion of the electronic
components in the device and mechanical stress from freezing of the condensation at
low temperatures.
• Dust and water proof: IP66
• Operating temperature: -30°C to +60°C
• Dimensions: 157x54x18 mm
• 110° wide-angle camera
• Video output: 1Vp-p75Ω
• Supply voltage: 10-15 V DC
• Input power: 2.5 W
1. Microphone
2. Camera
3. Night-time IR illuminator
4. Call button
5. Label displays
6. Speaker
7. Wiring harness receptacle
Tłumaczenie
150 cm