Installation Diagram - ZAMEL VO-802B Bedienungsanleitung

INSTALLATION DIAGRAM

A. Directly on a wall or a post
1. Select the installation height of the entrance panel and drill the mounting holes on the
installation surface at the desired height.
2. Remove the bracket by removing its lock screw.
3. Mount the bracket on the installation surface with wall plugs and their screws.
4. Pass the connection wiring end through the bracket and connect it to the entrance panel
wiring. Follow the wiring connection diagram.
5. Install the entrance panel on the bracket with the lock screw.
B. Directly on a wall or a post with the 30° angle console
1. Select the installation height of the entrance panel and drill the mounting holes on the
installation surface at the desired height.
2. Mount the 30° angle console on the installation surface with wall plugs and their screws.
3. Remove the factory bracket from the entrance panel back plate.
4. Install the removed bracket on the 30° angle console with the screws provided.
5. Pass the connection wiring end through the bracket and connect it to the entrance panel
wiring. Follow the wiring connection diagram.
6. Install the entrance panel on the bracket with the lock screw.