Setting The Alarm; Setting The Alarm Time And Alarm Type - Yamaha TSX-B235 Bedienungsanleitung

Setting the alarm

Setting the alarm time and alarm type

The alarm will not function when the unit is in ECO standby. To use the alarm function, set the rear panel CLOCK switch to the ON position
(+ P. 3).
1
2
3
Alarm time
9 : 1 2
C o m p l e t e d !
Alarm indicator
1 Press SET.
The alarm indicator (
2 Set the alarm.
Set items 1 - 5 described below.
Press –/+ to select a numerical value, and press ENTER to confirm it.
Items
1 ALARM SELECT * This can be selected after you've used "DTA
ONE DAY: An alarm that sounds only once at the
WEEKLY: An alarm whose time can be specified for
If you've chosen WEEKLY, this completes the alarm
setting.
ALARM TIME
2
Make settings in the order of hours
ALARM TYPE Select from SOURCE+BEEP, SOURCE or BEEP. For
3
details, refer to "3 types of alarms" (+ P. 18).
If you selected BEEP, proceed to item
4 ALARM SOURCE CD: Play back music from a CD.
(If you selected
SOURCE+BEEP or
SOURCE as the
USB: Play back music from a USB device.
alarm type)
DAB
If the selected source cannot be played back at the time set
for the alarm, the beep sound is played back.
ALARM VOLUME Specifies the volume (5-60) of the alarm.
5
*1
If you choose RESUME when specifying the track/folder/preset number, the last-
played track/folder/station will be played (resume playback)
*2 TSX-B235D only
3 Complete the settings.
When you set the VOLUME for item
"Completed!" and your settings will be confirmed.
The alarm will be turned on and the alarm indicator (
• By pressing SET during this procedure, you can confirm the alarm settings with the
currently-specified values and complete the procedure.
• If you decide to cancel alarm settings mid-way through the procedure, press
USING THE ALARM FUNCTION (IntelliAlarm)
) will blink.
Setting or range
CONTROLLER" to set the alarm (+ P. 21). If you're not
using "DTA CONTROLLER," proceed to item
specified time.
each day of the week (settable only using
"DTA CONTROLLER").
Specify the track number (data CD: folder
*1
number) (RESUME , 1-99).
Specify the folder number (RESUME, 1-999).
*2 /FM: Play a DAB *2 /FM station.
Specify the preset number (RESUME,
1-30).
5 , the display will indicate
2
.
minutes.
5
.
) will light.
.
19
En