Programming; Control Elements - Niko 05-351 Handbuch

05-351 / 05-352 / 05-336 / 05-300

4. PROGRAMMING

4.1. Control elements

A receiver only functions after the address of a transmitter has been programmed in it.
For programming, the following keys are used:
to set the modes
programming key
Programming is identical for all receivers included in this user manual.
EN
to select channel 1 or channel 2
1 1' 2
230V ~ 50Hz
select select
prog.
L L
8A 8A
output selected
LED = ON
2' N
05-352
to set the times: release
time, control time or
operating time
L N
reception of signal,
LED blinks
connector for external
antenna 05-309
59