05-351 / 05-352 / 05-336 / 05-300
3.3. Easywave splashproof receiver 2 channels 05-336
• 2 potentialfree relay contacts, 1 unipolar and 1 changeover, 10A, 230V 50Hz, suitable only
for monophase configurations, not for SELV circuits
• supply voltage 230V 50Hz
• degree of protection IP66
• use cable glands M16/20, the protection degree depends on the cable glands.
• suited for outdoor installation (ambiant temperature -20 up to 60°C)
• can be used with all Easywave transmitters
• per output one LED and local push button (select) with on/off function
•(additional) connection of 2 push buttons possible, e.g. push button 07-050 2xN.O.or IP55
push button 23-359-10 or 23-350
• up to 32 transmitters can be allocated to 1 receiver, 16 transmitters per channel
• to each transmitter and/or additional push button, a different function can be allocated
• wiring diagrams fig.5 & 6
LOAD TABEL for 05-336
Identical to 05-352
3.4. Nikobus Easywave interface 05-300
functionality see: operating instructions of Nikobus
see wiring diagram fig.2
58
EN