Operation; Technical Data - HANSGROHE Allegra Slim 31900 Serie Montageanleitung

Assembly
The fitting must be installed, flushed and
tested after the valid norms!
1. Flush through the supply pipes.
2. Place the mixer including the sealing washer in
position on the sink.
3. Slip the plastic washer, the slide washer, the
metall washer and collar over the hoses and
threaded base and tighten the collar nut by
hand. If there is not enough space, please use
only the slide washer and the metal washer
without the plastic washer.
4. Tighten screws.
5. Connect the supply pipes to the isolation valves;
cold right - hot left.
6. Connect a dish washer or a washing machine to
the thread DN20 (¾ ").
The hot and cold water supply's should be of equal
pressures.

Operation

The mixer is activated by lifting the lever handle.
Turning to the left = warmer water,
turning to the right = cooler water.
Turning to the left = stop valve open,
turning to the right = stop valve closed.

Technical Data

Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Recommended hot water temp.:
Rate of flow by 3 bars:
min
Hot water limiter:
6
English
Hansgrohe single lever mixers can be used
together with hydraulically and thermically
controlled continuous flow heaters if the flow
pressure is at least 1.5 bars.
Spare parts (see page 3)
1
1.1 screw cover
2
3
4
5
6
7
8
9
10 sealing set
11 fixing set
12 connection hose for 31900XXX
XXX = Colors
000 chrome plated
750 alux
880 satin chrome
max. 10 bars
1 - 5 bars
16 bars
max. 80° C
65° C
approx. 11 l/
order separatly
handle
flange
nut
cartridge cpl.
service set
packing kit (5)
mixer ball
aerator cpl. (10)
aerator gold plated
ELASTOP stop unit
connection hose for 31905XXX
fixation extension 35 mm
31991XXX
94186000
95046XXX
94106000
14095000
13952000
13962000
13964000
13085000
94980990
94849000
94850000
13961000
95050000
14099000
13898000