ASROCK Z270M Extreme4 Bedienungsanleitung Seite 24

Power LED and Speaker
Header
(7-pin SPK_PLED1)
(see p.1, No. 19)
Serial ATA3 Connectors
(SATA3_0:
see p.1, No. 16)
(SATA3_1:
see p.1, No. 15)
(SATA3_2:
see p.1, No. 13)
(SATA3_3:
see p.1, No. 14)
(SATA3_4:
see p.1, No. 12)
(SATA3_5:
see p.1, No. 11)
USB 2.0 Headers
(9-pin USB1_2
(see p.1, No. 22)
(9-pin USB3_4)
(see p.1, No. 21)
USB 3.0 Headers
(19-pin USB3_5_6)
(see p.1, No. 8)
(19-pin USB3_7_8)
(see p.1, No. 9)
(USB3_9)
(see p.1, No. 10)
22
SPEAKER
DUMMY
DUMMY
+5V
1
PLED+
PLED+
PLED-
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
Vbus Vbus
Vbus IntA_PB_SSRX-
IntA_PA_SSRX- IntA_PB_SSRX+
IntA_PA_SSRX+ GND
GND IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1
Please connect the
chassis power LED and
the chassis speaker to this
header.
These six SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* If M2_1 is occupied by
a SATA-type M.2 device,
SATA3_5 will be disabled.
* If M2_2 is occupied by
a SATA-type M.2 device,
SATA3_0 will be disabled.
There are two headers
on this motherboard.
Each USB 2.0 header can
support two ports.
There are two headers
and one port on this
motherboard. Each USB
3.0 header can support
two ports.