Connections; Dmx512 Control; Power Supply - EuroLite LED MINI D-20 Bedienungsanleitung

CONNECTIONS

DMX Controller

DMX512 control

A DMX512 data link is required in order to control the device via DMX. The device provides 3-pin XLR
connectors for DMX connection.
1 Connect the output of your DMX controller to the DMX input DMX IN of the light set with a DMX cable.
2 Connect the DMX output DMX OUT of the light set to the DMX input of the next unit in the chain. Always
connect one output to the input of the next unit until all units are connected.
3 At the last unit, the DMX cable has to be terminated. Plug the terminator with a 120 Ω resistor between
Signal (–) and Signal (+) in the DMX output of the last unit.
4 If the cable length exceeds 300 m or the number of DMX devices is greater than 32, it is recommended
to insert a DMX level amplifier to ensure proper data transmission.
XLR connection:

Power supply

The device uses an auto-range power supply that accepts input voltages between 100 und 240 volts.
1 Connect the device via the mains cable to a grounded mains socket. Thus the unit is switched on.
2 To switch off the unit, disconnect the power plug.
3 Do not connect the unit to the mains voltage via a dimmer. For a more convenient operation, use a mains
outlet which is switchable.
4 The jack POWER OUT allows for power supply of further devices. To interconnect several devices,
connect the jack POWER OUT to the input POWER IN of the next unit until all units are connected.
Matching power cables are available as accessories. In this manner, up to 8 devices can be linked at
230/240 input voltage and up to 4 devices at 110/115 input voltage.
Device 1
Start Address 1
DMX SLAVE
LED Mini D-20 Hybrid Beam Effect
No. 51918202 EAN 4026397552324
SENSITIVITY 100-240V~ 50/60Hz 30W T1A/250V
T =45°C
SOUND 0.1m a
AUTO T =50°C c
Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5
97297 Waldbüttelbrunn Germany www.steinigke.de
MODE UP DOWN ENTER
MIC
LED
SAFETY ROPE MINI D-20
Hybrid Beam Effect
FUSE:
T1A, 250 V
DMX OUT DMX IN
POWER OUT POWER SUPPLY:
100 - 240 V AC, 50/60 HZ ~
Program
Chase32 Step100
DMX SLAVE
LED Mini D-20 Hybrid Beam Effect
No. 51918202 EAN 4026397552324
SENSITIVITY 100-240V~ 50/60Hz 30W T1A/250V
0.1m T =45°C
AUTO SOUND a T =50°C
c
Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5
97297 Waldbüttelbrunn Germany www.steinigke.de
MODE UP DOWN ENTER
MIC
LED
SAFETY ROPE MINI D-20
Hybrid Beam Effect
FUSE:
T1A, 250 V
POWER OUT POWER SUPPLY: DMX OUT DMX IN
100 - 240 V AC, 50/60 HZ ~
Device 2
Start Address 5
DMX SLAVE
LED Mini D-20 Hybrid Beam Effect
No. 51918202 EAN 4026397552324
SENSITIVITY 100-240V~ 50/60Hz 30W T1A/250V
T =45°C
SOUND 0.1m a
AUTO T =50°C c
Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5
97297 Waldbüttelbrunn Germany www.steinigke.de
MODE UP DOWN ENTER
MIC
LED
SAFETY ROPE MINI D-20
Hybrid Beam Effect
FUSE:
T1A, 250 V
DMX OUT DMX IN
POWER OUT POWER SUPPLY:
100 - 240 V AC, 50/60 HZ ~
DMX SLAVE
LED Mini D-20 Hybrid Beam Effect
No. 51918202 EAN 4026397552324
SENSITIVITY 100-240V~ 50/60Hz 30W T1A/250V
0.1m T =45°C
AUTO SOUND T =50°C a
c
Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5
97297 Waldbüttelbrunn Germany www.steinigke.de
MODE UP DOWN ENTER
MIC
LED
SAFETY ROPE MINI D-20
Hybrid Beam Effect
FUSE:
T1A, 250 V
POWER OUT POWER SUPPLY: DMX OUT DMX IN
100 - 240 V AC, 50/60 HZ ~
21/28
Device 3
Start Address 9
DMX SLAVE
LED Mini D-20 Hybrid Beam Effect
No. 51918202 EAN 4026397552324
SENSITIVITY 100-240V~ 50/60Hz 30W T1A/250V
T =45°C
SOUND 0.1m a
AUTO T =50°C c
Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5
97297 Waldbüttelbrunn Germany www.steinigke.de
MODE UP DOWN ENTER
MIC
LED
SAFETY ROPE MINI D-20
Hybrid Beam Effect
FUSE:
T1A, 250 V
DMX OUT DMX IN
POWER OUT POWER SUPPLY:
100 - 240 V AC, 50/60 HZ ~
DMX SLAVE
LED Mini D-20 Hybrid Beam Effect
No. 51918202 EAN 4026397552324
SENSITIVITY 100-240V~ 50/60Hz 30W T1A/250V
0.1m T =45°C
AUTO SOUND a T =50°C
c
Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5
97297 Waldbüttelbrunn Germany www.steinigke.de
MODE UP DOWN ENTER
MIC
LED
SAFETY ROPE MINI D-20
Hybrid Beam Effect
FUSE:
T1A, 250 V
POWER OUT POWER SUPPLY: DMX OUT DMX IN
100 - 240 V AC, 50/60 HZ ~
00092113, Version 1.1