Grundig RCD 1500 BT Handbuch Seite 25

CD­MODE­ _ ___________________________________
The device is suitable for music CDs
displaying the logo shown here (CD-
DA) and for CD-Rs and CD-RWs with
audio data.
When burning CD-R and CD-RWs
with audio files, various problems may arise which
could lead to interference in playback. This can be
caused by faulty software or hardware settings or by
the CD being used. Should such problems arise, con-
tact the customer services of your CD burner or soft-
ware manufacturer or look for relevant information, for
example on the Internet. When you are making audio
CDs, observe all legal guidelines and ensure that the
copyright of third parties is not infringed.
Always keep the CD compartment closed to prevent
dust from collecting on the laser optics. Do not attach
adhesive labels to CDs. Keep the surfaces of CDs
clean. You can play standard 12 cm CDs as well as 8
cm CDs on your device. An adapter is not necessary.
Selecting­the­CD­input­source
1 Turn on the device by pressing the POWER button
briefly.
2
Move the
BLUETOOTH/CD/USB/RADIO
to the >>CD<< position.
3 Press »OPEN/CLOSE« to open the lid of the CD
compartment.
4 Insert a CD in the compartment with its label facing
upwards.
5 Press the »OPEN/CLOSE« to close the lid of the CD
compartment.
– The device reads the content of the CD. The total
number of tracks appears in the display.
CD­playback
1
Press »PLAY/PAUSE« to start playback.
– Playback begins with the first track.
– Display: the current track number.
– Playback stops at the end of the CD.
2
Press »PLAY/PAUSE« to pause playback
3
Press »PLAY/PAUSE
4 Press »PROG/MEM/STOP­
time, the system will remember the last played
position of the track. If you want to resume the play-
back again, press the
tinue the last playback.
switch
« to resume playback
« button for the first
PLAY/PAUSE button to con-
5
To fully erase the CD resume, press the
MEM/STOP
button for the second time.
6­Press OPEN/CLOSE
and take out the CD.
7 Close the CD compartment.
Repeating­the­current­track
1
During playback, press the
button once. The track will be repeated from the be-
ginning.
Selecting­another­track
1
During playback, keep pressing
»UP­ « until the number of the track you want to
hear appears in the display.
– Playback of the selected track starts automatically.
Note:
You can also select tracks in the stop position.
7
However, you must then start playback of the track
with »PLAY/PAUSE
In stop mode you can press and hold down
7
»DOWN­ « or »UP­
quickly.
Searching­for­a­passage­within­a­
track
1 During playback, press
and hold it down until you find the passage you want
to hear.
– Playback starts when you release
or »UP­ «.
Note:
During the search the volume is reduced.
7
Repeating­a­track­(Repeat­One)
1 During playback, press
once. The current track is repeated and the repeat
icon is flashing.
2 To terminate the function, press this button three
times.
Repeating­all­tracks­(Repeat­All)
1 During playback, press
ton twice until the repeat all icon appears. The whole
CD played repeatedly.
2
To terminate the function, press this button twice
PROG/
to open the CD compartment
MODE/MONO/ST.
»DOWN­
«.
« to select tracks more
»DOWN­ « or »UP­
»DOWN­
MODE/MONO/ST. button
MODE/MONO/ST.
ENGLISH
« or
«
«
but-
25­