Bluetooth Mode; Pairing­mode - Grundig RCD 1500 BT Handbuch

BLUETOOTH­MODE­___________________________
Bluetooth­Mode­
Connect to mobile device with Bluetooth
1­Switching on the device with "ON/OFF" button;
Move the (BLUETOOTH/CD/USB/RADIO) switch
2
to the >>BLUETOOTH<< position.
The "bt" will be flashing on LCD;
3
4 Go to your mobile device, and find the "Grundig
RCD 1500, Grundig GRB 3000" from the
available Bluetooth device list. Then press to
connect to the radio.
5 When device has been connected to the mobile
device, the "bt" announcement will stop flashing.
Playback­control­via­Bluetooth
1 Press the "ON/OFF" button to switch on the device;
2. Move the ( BLUETOOTH/CD/USB/RADIO) switch
to the >>BLUETOOTH<< position.
3
Connect the RCD1500 BT, GRB 3000 BT to mobile
device via Bluetooth;
4 PLAY/PAUSE
Press the
playback in between play or pause status;
5 Press the DOWN­ button to skip back to previous
button to toggle the music
played songs
6 Press the UP­ button to skip to the next songs;
Pairing­mode
1Press the "ON/OFF" button to switch on the device;
2
Move the BLUETOOTH/CD/USB/RADIO switch to
the >>BLUETOOTH<< position.
3
If the RCD1500 BT, GRB 3000 BT is connecting to
any mobile device via Bluetooth, press and hold the
PLAY/PAUSE
button to disconnect the current Blue-
tooth connection.
4 The RCD1500 BT, GRB 3000 BT will be in Bluetooth
pairing mode with flashing the "bt".
5 You can repeat the steps in "Connect to mobile de-
vice with Bluetooth" for a new Bluetooth connection.
Power­saving­in­Bluetooth
If there is no Bluetooth connection from the radio to any
mobile devices, the RCD1500 BT, GRB 3000 BT will
switch to off mode after 15 minutes.
23­
ENGLISH