Wiseup P9000 Benutzerhandbuch Seite 4

IV. Video/Image File Uploads
4.1 When the camera is powered off, remove the Micro SD card and insert it into a card reader.
4.2 Insert the card reader into a PC computer.
4.3 The Micro SD card will be recognized as a removable disk drive.
4.4 All the files can be accessed in the "DCIM" folder.
V. Setting Time/Date Stamp
5.1. Create a txt file named "TIMERSET" on your computer.
5.2. Input the current date and time in the "TIMERSET" file with the correct format:
YearMonthDateHourMinuteSecond Y. (For example: 20160412142432 Y), then save this file. If you don't
need the stamp on the video files, please change "Y" into "N" .
5.3. Turn off the camera, then connect it to a proper computer with the USB cable attached.
5.4. Connect the camera to a PC computer when it is powered off.
5.5. When the removable disk drive folder appears, copy the txt file "TIMERSET" to the disk drive.
5.6. Disconnect the camera with the computer, and then turn on the camera. The system will upgrade
the program automatically.
5.7. Turn off the camera, then connect the camera to the computer again with the USB cable attached, the
txt file "TIMERSET" will disappear and the time stamp setting will be updated.
VI. Charging Only
6.1 Remove the Micro SD card from the camera.
6.2 Connect the camera to a PC computer by using the USB cable provided.
4 / 36