Inspect The Unit Before Installing; Prepare The Ceiling; General Guidelines - Chief Manufacturing C3504 Anweisunghandbuch

Instruction Manual
INSPECT THE UNIT BEFORE
INSTALLING
1. Carefully inspect the Universal Ceiling Projector Mount
for shipping damage. If any damage is apparent, call your
carrier claims agent and do not continue with the installa-
tion until the carrier has reviewed the damage.
NOTE: Read all instructions before starting installation.
2. Lay out components to ensure you have all the required
parts before proceeding (see "PARTS" on page 2).

PREPARE THE CEILING

Because of the wide variety of possible mounting situations,
Dell Computer Corporation can only provide general guide-
lines for installation. Study the following information carefully,
and adapt it as necessary to fit your specific installation.
WARNING: Be especially aware of the weight of the
equipment, and the potential for personal
injury or of damage to the equipment if it is
not adequately mounted.
The "General Guidelines" below and the information on the
following pages cover the most common mounting situations:
• Suspended from an adjustable column secured to a struc-
tural cross brace in the ceiling.
• Standard fasteners secured to a wood framing member.
• Suspended from threaded rods that are secured to the
structural cross brace

General Guidelines

• Carefully determine the position of the Universal Ceiling
Projector Mount, and its distance from the screen. This
will require knowing the lens to screen distance (see pro-
jector specifications for set-up).
WARNING: Improper installation can result in serious
personal injury! To avoid such injury, make
sure that the ceiling structural members can
support a redundant weight factor five times
the total weight of the equipment you intend
to support overhead. If they cannot, the
ceiling must be reinforced before you install
the Universal Ceiling Projector Mount.
4
MSP-DCCC3504