Inhaltsverzeichnis
Werbung
2.8 M.2_SSD (NGFF) Module Installation Guide (M2_1 and
M2_2)
The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and
versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2
Socket (M2_1) supports M Key type 2230/2242/2260/2280 M.2 PCI Express module up to
Gen3 x4 (32 Gb/s). The M.2 Socket (M2_2) supports M Key type 2230/2242/2260/2280 M.2
SATA3 6.0 Gb/s module and M.2 PCI Express module up to Gen3 x1 (8 Gb/s).
* Please be noted that if M2_2 is occupied by a SATA-type M.2 device, SATA3_1 will be
disabled.
Installing the M.2_SSD (NGFF) Module
No.
E
D
Nut Location
PCB Length
Module Type
26
5
4
3
2
1
1
A
C
B
A
3cm
4.2cm
Type2230
Type 2242
Step 1
Prepare a M.2_SSD (NGFF) module
and the screw.
Step 2
Depending on the PCB type and
length of your M.2_SSD (NGFF)
module, find the corresponding nut
location to be used.
2
3
B
C
6cm
Type2260
Type 2280
4
D
8cm
Werbung
Inhaltsverzeichnis
