Symbol Description; Gluing Instructions; Safety Notes - GRAUPNER Vector Hottrigger 840 Anleitung

Symbol description

!
Caution

Gluing instructions

Safety notes

!
13409_hb_V1
Always follow the information marked with the
WARNING
symbol. The signal word
potential for serious injury, the signal word CAUTION indicates
potential minor injuries.
The signal words note and caution indicate potential damages to
objects.
INJURY RISK, MOVE THE CUTTER ALWAYS IN THE OPPO-
SITE DIRECTION OF YOUR FINGERS AND HANDS.
All parts are glued with UHU
No.5822 and activator spray
General
These safety instructions are intended not only to protect the prod-
uct, but also for your own and other people's safety. Therefore please
read this section very carefully before using the product!
Do not leave the packaging material lying around, this could be a
dangerous toy for children.
 Persons, including children, with reduced physical, sensory or men-
tal capabilities, or lack of experience or knowledge, or not capable
Vector Hottrigger 840
to use safely the
without supervision or instruction by a responsible person.
 Operation and use of radio-controlled models needs to be learnt! If
you have never driven such a model, then start extra carefully and
make sure to be familiar with the reactions of the model to the
remote control commands. Proceed responsibly.
 Before you start using the remote control model, you have to check
the further relevant laws and regulations.
 The user must be sure, before each use of RC model, about the func-
tional safety and the proper condition of the RC model.
 The insurance is mandatory for all kinds of RC model operation.
CAUTION
WARNING
indicates the
por No. 959, instant adhesive
No. 953.150.
must not use the model
11 / 32
or