Other Information - Kenwood KMM-BT506DAB Schnellstartanleitung

6 Repeat step 4 and step 5 to set color for other zones.
7 Press and hold to exit.

Other Information

For playback operations of AUX, Spotify, and AMAZON ALEXA sources,
refer to the INSTRUCTION MANUAL on the following website:
<www.kenwood.com/cs/ce/>
Note for specifications
Bluetooth Frequency Range:
2.402 GHz — 2.480 GHz
Bluetooth RF Output Power (E.I.R.P.):
+4 dBm (MAX), Power Class 2
Speaker Impedance:
4 Ω — 8 Ω
Operating Voltage:
12 V DC car battery
12
Bluetooth®
• Depending on the Bluetooth version, operating system and the
firmware version of your mobile phone, Bluetooth features may not
work with this unit.
• Be sure to turn on the Bluetooth function of the device to make the
following operations.
• Signal conditions vary depending on the surroundings.
Connect the microphone
Connect the supplied microphone to the microphone input jack on the rear
panel.
Adjust the
microphone
angle
Pair and connect a Bluetooth device for the first time
1 Press B SRC to turn on the unit.
2
Search and select the name of your receiver ("KMM-BT506DAB"/
"KMR-M506DAB") on the Bluetooth device.
"PAIRING" "PASS XXXXXX"
KNOB" appears on the display.
• For some Bluetooth devices, you may need to enter the Personal
Identification Number (PIN) code immediately after searching.
3 Press the volume knob to start pairing.
"PAIRING OK" appears when pairing is completed.
Secure using cord
clamps (not supplied)
if necessary.
"Device name" "PRESS" "VOLUME