Tanberg TIA 3012 Bedienungsanleitung Seite 9

• Connect tape recorder(s) as shown in the
figu reo
• Set program selector to Tape 1 or Tape 2.
Tape 1: Playback from Tape Play 1 sockets.
Tape 2: Playback from Tape Play 2 sockets.
• Connect the equipment
• Set program selector to Digital Disc.
Recording on a connected
open-reel/cassette recorder
• Connect the program from the program source
to the corresponding input on the TIA 3012
and set the record selector to the correct
position.
The program is now connected to all Tape Rec.
sockets.
If the connected tape recorder has a B-test facility
(tape test) and it is set to carry out the B-test, the
test can be performed by setting the program
selector to respectively Tape 1 or Tape 2.
as shown in the figure.
LINE LINE
OUT IN
0000"'0000
OOOR
2 0
LINE LINE
OUT IN
LINE LINE
IN OUT
1 0 2'
'RR
0 0 0
eO
LINE LINE
IN OUT