Werbung
Verfügbare Sprachen
Verfügbare Sprachen
IMPORTANT!
All connections
out before the power is switched on.
For connecting
Moving Coil pickup.
For connecting
Moving Magnet pickup.
CAUTION!
longer than 15 mm. At the bottom
of each phono socket is a switch
that can be damaged if the plug is
too long, see figure.
Tuner:
For connecting
DD/Aux:
For connecting
player or other audio equipment.
Reel
Tape
Tape Play:
For connecting
recorder or cassette recorder.
For connecting
CAUTION!
Check the polarity
the speakers.
The figures on pages 46 and 47 show examples of
connections,
signal paths and plug types.
NOTE! A protection
circuit will cause a few
seconds delay.
Peak clipping indicators
The indicators
(one for each channel) will
indicate when peak clipping
• Control
the volume with the knob marked
Volume.
• Control
the volume balance between the right
and left channels with the knob marked
Balance.
Headphones
• Connect stereo headphones to the socket
marked Headphones.
• Adjust the volume in the headphones with the
knob marked Volume.
The balance control,
marked Balance, is common
to the headphones and loudspeakers.
should be carried
record player with
record player with
Do not use phono plugs
an FM/AM
tuner.
a digital record
an open-reel tape
4 loudspeakers.
of
of the signal occurs.
0110
,,6kHz
o3KHz
Loudrless
Werbung
