Fein BOZ 32-4 M Serie Originalbetriebsanleitung Seite 14

en
14
Original Instructions.
en
Symbols, abbreviations and terms used.
Symbol, character Explanation
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
Observe the information in the adjacent text!
General prohibition sign. This action is prohibited.
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Before commencing this work step, pull the mains plug out of the socket. Otherwise there will
be danger of injury if the power tool should start unintentionally.
Use eye protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
Gripping surface
Additional information.
Confirms the conformity of the power tool with the directives of the European Community.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
WARNING
Recycling symbol: designates recyclable materials
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environmental-friendly recycling.
Product with double or reinforced insulation
Switching on
Switching off
3. 4. 1. gear/2. gear/3. gear/4. gear
MT Morse taper size (ISO 296)
Low speed
High speed
(**) may contain numbers and letters
Character Unit of measurement,
international
P
W
1
P
W
2
U
V
f
Hz
Unit of measurement,
national
W
W
V
Hz
Explanation
Power input
Output
Rated voltage
Frequency