Vox Function; Vibra-Call Function - Midland G9 PLUS Bedienungsanleitung

you choose "L" (low power), by pressing the big PTT, the transceiver will
transmit with low power; while by pressing the small PTT it will transmit
with high power.
• LPD channels: the high/low output power selection is not available on LPD
channels; so the two PTT transmit always with high power (note for G9 Plus
Dualband version).
WARNING: to optimize the battery consumption, it is necessary to set the Ou-
tput power of the menu as "L-low". In this way, pressing the Boost PTT, you send
with high power only when you really need. As by default the Output power is "H-
high"; so it is really recommended to change this parameter to "L-low".

VOX function

Midland G9 Plus enables hands free conversations through the VOX function:
just speak in the direction of the microphone and the communication will be
automatically activated.
The VOX sensitivity can be adjusted in 3 different levels.
You can enable the VOX function with or without accessories.
The fourth level activated is the Vox TalkBack: if one radio is continuously
transmitting in VOX, the Vox TB will automatically stop the transmission after
20 seconds to allow the transmission to the other users as well.
To activate the VOX function press the MENU button till VOX appears on
the display.
Use ▲▼ to select the sensitivity levels:
• Of: Off;
• 1: High
• 2: Middle
• 3: Low
• 4: Talk Back (with high sensitivity)
To confirm your selection, press PTT or wait for 5 seconds.
To disable the VOX function, follow the procedure here above indicated and
select oF.

Vibra-Call function

Midland G9 Plus is equipped with the "Vibra-Call" feature, which provides a
silent alert for incoming calls.
1. To activate this feature, press the MENU button until the display shows
Midland G9/G9E Plus instruction guide | 17