Power Specifications - HP Latex 115 Einführende Informationen

Error code
86:01, 86.2:01
87:01
89:11, 89.1:10, 89.2:10
94:01
94:02
94:08
98:03
Power specifications
Approximate AC voltage
Frequency
Printer power
Maximum printer current
Curing power
Maximum curing current
14 HP Latex 115 and 300 Printer Series
Recommendation
There is a problem in the carriage assembly.
1. Turn off the printer.
2. Open the window, observing all safety procedures, and check for any visible
obstacles restricting the movement of the carriage. If there is a wrinkled mass
of substrate inside the substrate path, lift the pinchwheels (using the
substrate lever) and clear the obstruction.
3. Turn on the printer.
The scan-axis encoder strip is detecting errors in the carriage position. Clean the
encoder strip.
The interior-light PCA may be failing or disconnected. The printer will continue
operating normally, with only this functionality affected.
Color cannot be calibrated on this substrate. White substrate measurement is out of
range.
Inconsistent colors found.
1. Check that the substrate-type selection in the front panel corrresponds to an
actual substrate loaded.
2. Retry calibration.
Color calibration failed. Try again. See more details about the color calibration
functionality in the user guide.
One or more printheads are malfunctioning. Use the printhead status plot to find out
which printheads are malfunctioning, and replace them.
HP Latex 115/315 Printer
200–240 V ±10%
50/60 Hz
200 W
3 A
2.0 kW
13 A
HP Latex 335 Printer
200–240 V ±10%
50/60 Hz
200 W
3 A
2.4 kW
16 A
HP Latex 365/375 Printer
200–240 V ±10%
50/60 Hz
2.5 kW
16 A
2.1 kW
16 A
ENWW