Transportation Of The Pellet Burner; Delivery Of The Pellet Burner - Sunsystem Burnit Pell series Technischer Datenblatt Montage- Und Bedienungsanleitung

TECHNICAL PASSPORT INSTALLATION and OPERATION MANUAL
We recommend to use pellet with size of 6 - 8mm.
Density 600 - 750kg/m
kg. Ash content – less than 1% and moisture content
up to 8%, EN 14961-2:2011.
The optimal density of the pellets which guarantees
their quality is 605-700 kg per cubic meter.
Pellet moisture content must not exceed 10%. Make
sure you store your fuel in a dry and well-ventilated
Table 2. European Certification of Wood Pellets for Heating Purposes
Parameters
Diameter
Length
Bulk density
Calorific/heating value
Humidity /moisture
Dust
Mechanical durability
Ash
Melting point of ash
Chlorine content
Sulfur content
Nitrogen content
Copper content
Chromium content
Arsenic content
Cadmium content
Mercury content
Lead content
Nickel content
Zinc content
not more than 1% of the pellets may be longer than 40 mm, max. length 45 mm;
1)
dry weight;
2)
particles <3.15 mm, particulate matter, before handing over the goods;
3)
measurements with Ligno-Tester limit value ≥ 97,7% by weight.
4)

4. TRANSPORTATION OF THE PELLET BURNER

When loading, transporting and unloading of the
device appropriate safety equipment must be used in
accordance with Directive 2006/42/SE. Product must
be in original packaging following the instructions
on the label - to be protected from adverse weather
conditions (snow, rain and dust) from the shocks,
and other activities likely to cause damage. In case
of malfunction of the fan or the motor drive (noise,
friction) or failure of high-tech elements such as
broken LCD screen, contact your nearest authorized
service center for repairs and maintenance.
- Dimensions of the packaging of the burner:
450х350х750 mm
- Dimensions of the packaging of the auger:
260х120х1700 mm
heating value 4.7 - 5.5 kWh/
3
Units
mm
mm
kg / m
2
MJ / kg
Ма .-%
Ма .-%
Ма .-%
Ма .-%
2)
°C
Ма .-%
2)
Ма .-%
2)
Ма .-%
2)
mg / kg
2)
mg / kg
2)
mg / kg
2)
mg / kg
2)
mg / kg
2)
mg / kg
2)
mg / kg
2)
mg / kg
2)
place.
The optimal pellet ash content is ≤ 1%. This also
provides for less frequent cleaning intervals for the
burner.
The table below contains the parameters which we
recommend that you take into consideration when
choosing fuel for your „Pell" burner.
ENplus-A1 ENplus-A2
6 (± 1) 6 (± 1)
8 (± 1) 8 (± 1)
15 ≤ L ≤ 40 15 ≤ L ≤ 40
1)
≥ 600
≥ 16,5-19 ≥ 16,3-19
≤ 10
≤ 1
3)
≥ 97,5 ≥ 97,5
4)
≤ 0,7
≥ 1200 ≥ 1100
≤ 0,02 ≤ 0,02
≤ 0,03 ≤ 0,03
≤ 0,3
≤ 10
≤ 10
≤ 1,0
≤ 0,5
≤ 0,1
≤ 10
≤ 10
≤ 100

5. DELIVERY OF THE PELLET BURNER

• Inspect the integrity of the packaging upon
delivery.
• Check whether all components have been
delivered to you. Burner consignment package
includes (diagram 3):
1) Pellet Burner Pell with built-up Control unit
2) Feeding chute
3) Fire irons
4) Auger
5) Technical passport. Installation and operation
manual
6) Service booklet and Warranty card
If any of the above items are missing, contact your
supplier.
Diagram 3. Pellet burner consignment
7
EN-B
6 (± 1)
8 (± 1)
15 ≤ L ≤ 40
1)
≥ 600 ≥ 600
≥ 16,0-19
≤ 10 ≤ 10
≤ 1 ≤ 1
3)
≥ 96,5
4)
≤ 1,5 ≤ 3,5
-
≤ 0,03
≤ 0,04
≤ 0,3 ≤ 1,0
≤ 10 ≤ 10
≤ 10 ≤ 10
≤ 1,0 ≤ 1,0
≤ 0,5 ≤ 0,5
≤ 0,1 ≤ 0,1
≤ 10 ≤ 10
≤ 10 ≤ 10
≤ 100 ≤ 100
elements
EN
1)
3)
4)