Radio Controls; Receiving And Transmitting - Motorola ASTRO APX 8000 Series Schnellreferenzkarte

PMLN7246A_EMEA.book Page 3 Sunday, August 9, 2015 5:45 PM
m
®
ASTRO APX™ 8000 Series
Digital Portable Radios
Quick Reference Card
RF Energy Exposure and Product Safety
Guide for Portable Two-Way Radios
ATTENTION!
This radio is restricted to Occupational use only. Before using
the radio, read the RF Energy Exposure and Product Safety
Guide for Portable Two-Way Radios which contains important
operating instructions for safe usage and RF energy awareness
and control for Compliance with applicable standards and
Regulations.

Radio Controls

Top (Orange)
3-Position A/B/C Switch
Button __________________
__________
2-Position
Concentric Switch
Microphone
______________
Accessory
Connector
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC
and are used under license. All other trademarks are the property of their respective owners.
© 2015 by Motorola Solutions, Inc. All Rights Reserved. Wi-Fi
16-Position
Select Knob
__________
On/Off/Volume
Control Knob
Top Side (Select)
Button
__________
PTT Button
Side Button 1
__________
Side Button 2
__________
Radio On/Off
• On – On/Off/Volume knob clockwise.
• Off – On/Off/Volume knob counterclockwise.
Zones and Channels
• Zone – Toggle the Zone switch or use the radio
menu to the desired zone.
• Channel – Turn the Channel knob or use the
radio menu to the desired channel.
® ®
is a registered trademark of Wi-Fi Alliance .

Receiving and Transmitting

Antenna
1
Select zone/channel.
Top 2
Listen for a transmission.
Display
OR
Press and hold Volume Set button.
OR
Press Monitor button and listen for activity.
Microphone
Bluetooth
3
Adjust volume, if necessary.
Pairing
Indicator 4
Press the PTT button to transmit; release to
receive.
Main
Speaker
Sending an Emergency Alarm
1
Press and hold the Emergency button*.
2
The display shows EMERGNCY and the
Battery
current zone/channel. A short, medium-
pitched tone sounds, and the LED blinks red
momentarily.
3
When acknowledgment is received, you hear
four beeps; alarm ends; and radio exits
emergency.
*Default timer of Emergency button press to
activate Emergency is 50 milliseconds. This
timer is programmable, see Emergency
Operation in the user guide for details.
To exit emergency at any time, press and hold
the Emergency button.
English