Basic Operations - Kenwood KDC-BT740DAB Bedienungsanleitung

AMAZON ALEXA
3 Tap "Add Device".
4 Tap "Automotive Accessory" or "Headphones" from the list of device types.
5 Tap the name of your receiver ("KDC-BT740DAB" ) and follow the instructions.
Once the setup process is completed, the Alexa mobile application will
establish a connection with this unit.
• The Alexa connection can be disconnected if:
– A2DP profile is disconnected
– Bluetooth is disconnected
– This unit is turned off
– Any other conditions depending on the connected device.
To establish Alexa connection again, reconnect the A2DP profile.
• Alexa connection cannot be established again if you:
– Reinstall Alexa mobile application
– Delete the paired device and perform pairing again (for Android device)
To establish Alexa connection again, perform the setup process again.
• You can check the Alexa connection from the Alexa mobile application.
If the name of this unit appears on the screen of "ALL DEVICES", you do not
need to perform setup process again.

Basic operations

Once Alexa connection is established...
1
Press on the unit to speak with Alexa.
The display shows: "ALEXA"
24
ENGLISH
"LISTENING...".
2
Communicate with Alexa via the connected microphone. (Page 17)
"THINKING..." appears when Alexa is processing your voice input.
"SPEAKING..." appears while Alexa is responding to your voice input.
"ALEXA" or display information such as playing time, song title, etc.
appears while Alexa is in idle state.
• To return to the previous source before ALEXA, press B SRC.
• To activate Alexa, press .
• To cancel current listening state, press .
• To cancel current thinking/speaking states and go to listening state,
press .
• Only one Alexa connection can be connected at one time.
• "DISCONNECTED" appears if the unit is disconnected from Alexa mobile
application or the Bluetooth connection is disconnected.
Start listening
While in Alexa idle state...
1
Press on the unit to activate Alexa.
The display shows: "LISTENING...".
2
Communicate with Alexa via the connected microphone. (Page 17)
3
During music playback in ALEXA source, you can perform the
following operations:
To
Play back/pause
Reverse skip/Forward skip
During music playback, press to pause the music and activate Alexa. You
can now start to communicate with Alexa.
On the faceplate
Press 6 IW.
Press S / T.