Troubleshooting - FLAEM Wi.Neb Bedienungsanleitung

TROUBLESHOOTING

If the device does not work
when operated using power adaptor or
cigarette lighter cable)
If the device provides low mist
If the device provides no mist
The nebulizer seems inefficient
If after checking the conditions listed above the nebulizing function of the device still does not work contact
your local dealer or authorized service center for assistance.
• Check that the power adaptor plug is properly plugged in.
Check that the electrical receptacle functions by plugging
in a different device to see if it works.
• Check if the power cord and/or plug are faulty or damaged. In
this case do not use the device.
• Check the plug for connecting the cable to the 12 V
DC cigarette lighter receptacle is properly inserted and
that the fuse, found in the connection plug is not blown.
• Check that the medicine is not too cold; it should be close
to room temperature.
• Check that there is at least 2ml of medicine in the nebulizer.
• Check for medicine in the nebulizer.
• Check that the nebulizer nozzle is not clogged.
• Check that the air inlet of the device and the accessories
are properly connected (see connection diagram in fig. 1).
• Make sure that the device is connected to the power adap-
tor and that the power adaptor is connected to the recep-
tacle.
• Failure to clean the nebulizer from medicine deposits
compromises the efficiency and functioning of the device.
• Carefully read and follow the instructions included in
the CLEANING, SANITIZATION AND DISINFECTION
section.
ENGLISH
- 17