Herunterladen Inhalt Inhalt Diese Seite drucken

Warranty And Service Contact Information; Fcc Statement; Compliance Information For The European Union - Blade Vortex Pro BNF Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

be reached during business hours. When sending product into Horizon, please include your RMA
number, a list of the included items, and a brief summary of the problem. A copy of your original
sales receipt must be included for warranty consideration. Be sure your name, address, and RMA
number are clearly written on the outside of the shipping carton.
NOTICE: Do not ship Li-Po batteries to Horizon. If you have any issue with a Li-Po battery, please
contact the appropriate Horizon Product Support offi ce.
Warranty Requirements
For Warranty consideration, you must include your original sales receipt verifying the
proof-of-purchase date. Provided warranty conditions have been met, your Product will be
serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of
Horizon.
Non-Warranty Service
Should your service not be covered by warranty, service will be completed and payment
will be required without notifi cation or estimate of the expense unless the expense
exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing
to payment of the service without notifi cation. Service estimates are available upon request. You
must include this request with your item submitted for service. Non-warranty service estimates
will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight. Horizon
accepts money orders and cashier's checks, as well as Visa, MasterCard, American Express, and
Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizon's Terms
and Conditions found on our website http://www.horizonhobby.com/content/_service-center_
render-service-center.
ATTENTION: Horizon service is limited to Product compliant in the country of use
and ownership. If received, a non-compliant Product will not be serviced. Further, the
sender will be responsible for arranging return shipment of the un-serviced Product,
through a carrier of the sender's choice and at the sender's expense. Horizon will hold
non-compliant Product for a period of 60 days from notifi cation, after which it will be
discarded.

Warranty and Service Contact Information

Country of
Horizon Hobby
Contact Information
Purchase
Horizon Service Center
servicecenter.horizonhobby.
(Repairs and Repair
com/RequestForm/
Requests)
productsupport@horizon-
Horizon Product Support
United States
hobby.com
(Product Technical
of America
Assistance)
877-504-0233
websales@horizonhobby.com
Sales
800-338-4639
sales@horizonhobby.co.uk
United
Service/Parts/Sales:
Kingdom
Horizon Hobby Limited
+44 (0) 1279 641 097
Horizon Technischer
service@horizonhobby.de
Service
Germany
Sales: Horizon Hobby
+49 (0) 4121 2655 100
GmbH
infofrance@horizonhobby.com 11 Rue Georges Charpak
Service/Parts/Sales:
France
Horizon Hobby SAS
+33 (0) 1 60 18 34 90

FCC Statement

This equipment has been tested and found to comply with the limits for Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTICE: Modifi cations to this product will void the user's authority to operate this equipment.
IC Information
Under Industry Canada regulations, this radio transmitter may only operate using an antenna
of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To
reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary
10/15
for successful communication.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
Address
this device must accept any interference, including interference that may cause undesired
operation of the device.

Compliance Information for the European Union

4105 Fieldstone Rd
Champaign, Illinois, 61822 USA
A copy of the EU Declaration of Conformity is available online at:
http://www.horizonhobby.com/content/support-render-compliance.
Units 1–4 , Ployters Rd,
Staple Tye
Instructions for disposal of WEEE by users in the European Union
Harlow, Essex, CM18 7NS,
United Kingdom
Christian-Junge-Straße 1
25337 Elmshorn, Germany
77127 Lieusaint, France
please contact your local city offi ce, your household waste disposal service or where you
purchased the product.
EU Compliance Statement:
Horizon Hobby, LLC  hereby declares that this product is in compliance with
the essential requirements and other relevant provisions of the R&TTE and
EMC Directives.
This product must not be disposed of with other waste. Instead, it is the
user's responsibility to dispose of their waste equipment by handing it over to a
designated collections point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at
the time of disposal will help to conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment. For more
information about where you can drop off your waste equipment for recycling,

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Blh9250Blh9250eu

Inhaltsverzeichnis