Silvercrest SWV 733 B1 Bedienungs- Und Sicherheitshinweise Seite 186

SilverCrest SWV 733 B1
If you are not using the host network default settings on your computer and have
manually set an IP address, you must restore the host network settings to
Automatically obtain IP address. For further details, please consult the
documentation provided with your computer.
1. You can configure the Dual-Band Range Extender via the network cable. If you want to
configure the Dual-Band Range Extender via the network cable, you must connect the Dual-
Band Range Extender to your computer. Use the network cable provided with the device for
this purpose. Insert one end of the network cable into the WAN/LAN socket (5) of the Dual-
Band Range Extender and the other into the LAN socket of your computer.
2. Alternatively you can perform the configuration via a wireless network. To do so, start the
search for available wireless networks on your computer. The host network SWV 733 B1
2.4G or SWV 733 B1 5G is displayed in the list of available wireless networks. Select the
host network SWV 733 B1 2.4G or SWV 733 B1 5G and click on the Connect button
to wirelessly connect to the Dual-Band Range Extender. The Dual-Band Range Extender
comes secured
(9426824723156819), the Connect without configuring the network option
must be clicked on. The "Limited network connection" message is displayed, if necessary.
184 - English
with a host password. After entering the host password