Silvercrest SWV 733 B1 Bedienungs- Und Sicherheitshinweise Seite 183

SilverCrest SWV 733 B1
Set the checkmark for "I am connected to the extended network." and then click on the Finish
button. The status page of the configuration menu is now opened. Please note that a connection
to the Dual-Band Range Extender must be established for this purpose. To do so, connect the
Dual-Band Range Extender to your computer via the network cable.
Following the reboot, the Dual-Band Range Extender can be accessed under the host SSID
(wireless name) previously specified by you and the host password of your Wi-Fi router. Your host
password can usually be found on your router, provided it has not been changed by you.
Once the connection has been successfully established, the Field strength indicator (1) displays
the signal strength. You can now use the Dual-Band Range Extender where the Wi-Fi signal is to
be extended. The optimum location for the Dual-Band Range Extender is exactly in the middle
between your wireless router and wireless devices, which are to be connected to the wireless
network via the Dual-Band Range Extender. Test other locations if the Dual-Band Range Extender
does not work there. Plug the Dual-Band Range Extender only into a power socket, which is easily
accessible.
English - 181