Fermax DUOX Video Skyline Installationshandbuch Seite 44

DUO X X X X X V V V V V ideo Sk DUO DUO ideo Sk ideo Sk
DUO DUO ideo Sk ideo Sk yline
DUO DUO DUO X X X X X V V V V V ideo Sk ideo Sk ideo Sk
ideo Sk yline
DUO DUO ideo Sk
EN
DUOX Amplifier Call:
•
You can use the buttons with keypads to make direct calls
to specific apartments (professionals).
•
The house terminal´s address is encoded with 6 digits
(calling code). The default value is 000000, (not
programmed).
•
Panels with an address "0" in each block allow for
communication with telephones when picked-up or with
the monitors doing an auto-start with it and the
communication lines are free. If you do not want this
feature do not assign this address to any panels. The
monitors also have the option of an auto-start with panel 1
in your block and panel 0 of the General Entrance.
•
A call is made to the home:
- Button Panels: pressing the corresponding button.
- Panels with keypad: Entering the residence number +
bell. You do not need to enter the 6 digits. If a shorter
code is entered, it is filled in with «0» to the left. The
letter «A» can be used to delete the sequence entered.
Pag 44
yline yline
yline yline
yline yline
yline
yline