Forest-Master FM5 Handbuch Seite 28

10TW Trolley
Assembly of the full height trolley is basically the same as for the FMT stand
except that the castor assembly bolts into the bottom of the front leg. Use
the nut and bolt that fastens the two parts of the front foot assembly
together. Ensure the power is disconnected before assembly.
Fitting the 10TW Trolley to the FM5P, FM8P & FM10P
Remove the rear wheels from the
axle. Remove the throttle mount
and throttle. and remove the
rear legs. Remove the front leg
assembly from the log splitter
and remove the castor assembly
from the front leg. Keep all nuts
and bolts as these are used on the
new stand.
28
Attach the wheels to the axles on the rear
cross beam. Attach the new rear legs
and throttle assembly to the log splitter
and attach the rear wheel assembly to
the legs. Attach the new front leg to
the log splitter and attach the castor
assembly to the bottom. Finally attach
the connecting bar between the front
foot and rear wheels
FM5, FM8 & FM10 (All Versions)