Switching From Dvd To External Source (Aux-In) - Phonocar X Slim VM 011 Bedienungsanleitung

Switch from DVD external source (AUX-IN)
Volume-regulation • Switch-on and Switch-off
Switch from DVD to AUX-IN
Two external sources can be connected to the DVD-player,
through the front and rear AUX-inputs.
Every time you press the AUX-key, the DVD will switch to
AUX 1 and AUX 2.
1 - C o n n e c t
nal unit by means of an Audio/Video-cable.
Connect the audio-output of the given source with the
AUDIO-IN-input of the DVD-player (RCA WHITE-RED).
Connect the video-signal to the VIDEO-IN-input (RCA
YELLOW).
2 - Switch the external source on.
3 - Select the auxiliary input by means of the AUX-key of
the remote-control unit.
4 - The display will show the signal of the external source. If
PLAYBACK is in course, the disc will be stopped.
Volume-Regulation
Press key vol. + to increase the volume.
Press key vol. – to reduce the volume.
POWER
VOLUME
t h e e x t e r -
A/V - AUX
AUX DISP
Menu Setup Pause
Enter
Play
Vol - Vol +
1 2 3
4 5 6
7 8 9
0
10+
Goto Mute
RPT Slow ZOOM
Title
Sub-
Audio Angle P/N
Title
Switch-ON-ON and Switch-OFF
Press key...
player or on the remote-control unit, to switch on and
off.
Memory of the reproduction-position
By switching-off the DVD-player or the car-engine while
playback is in course, or by changing the video-source,
reproduction will resume from the interrupted position.
Interruption-memory will be cancelled when disc is eject-
ed or by pressing RESET.
31
POWER on the front-panel of the DVD-
GB