Use Of Remote-Control Unit - Phonocar X Slim VM 011 Bedienungsanleitung

Use of remote-control unit

Prepare Remote-control unit
Extract the protection-lid of the battery, to activate the remote-control battery.
Replacement of Remote-control Battery
Exclusively use Lithium-batteries (3V, Cr2025).
To open the cover, press hook and pull outward.
Insert the battery with positive pole showing upward. Shut cover again.
Remarks regarding the battery: to make sure that the remote-control unit works correctly, observe the following instruc-
tions:
- Do not insert the battery in the wrong direction
- Do not recharge, heat, open or short-circuit the battery
- If the remote-control unit does not work correctly, or if its action area is getting restricted, replace battery with a new one.
Never throw batteries into the fire.
The remote-control unit reacts from a distance of about 4
meters from the sensor, with a 30° angle in all directions,
from the sensor-front.
28
about 4 meters