Using The Tuner; Listening To The Radio Broadcasts; Tuning; Saving Station Presets - Pioneer X-HM21BT Bedienungsanleitung

Using the tuner

Chapter 8:
Using the tuner

Listening to the radio broadcasts

The following steps show you how to tune in to FM and AM
radio broadcasts using the automatic (search) and manual
(step) tuning functions. Once you are tuned to a station you
can memorize the frequency for recall later. See Saving
station presets below for more on how to do this.
STANDBY/ON OPEN/CLOSE
 
CD USB TUNER AUDIO IN
BT AUDIO CLOCK/TIMER SLEEP
EQUALIZER
1 2 3
P.BASS
4 5 6
BASS/TREBLE
7 8 9
RANDOM
CLEAR REPEAT
0
DISPLAY FOLDER
TUNE+

Tuning

1 Press the STANDBY/ON to turn the power
on.
2 Press TUNER repeatedly to select desired
frequency band (FM or AM).
3 Press TUNE +/– on the remote control to
tune in to the desired station.
Automatic tuning:
Press and hold TUNE +/–, scanning will start automatically
and the tuner will stop at the first receivable broadcast
station.
Manual tuning:
Press the TUNE +/– repeatedly to tune in to the desired
station.
Note
• When radio interference occurs, automatic tuning may
stop automatically at that point.
• Automatic tuning will skip weak signal stations.
• To stop the automatic tuning, press
• When an RDS (Radio Data System) station is tuned in,
the frequency will be displayed first. Finally, the station
name will appear.
• Full auto tuning can be achieved for RDS stations using
Auto Station Program Memory (ASPM) mode, see
page 25.
0
DISPLAY FOLDER
TUNE+
ENTER
MEMORY
MENU
/PROGRAM
PRESET VOLUME
TUNE–
+ +
MUTE
– –
DIMMER
 

  
RDS
ST/MONO ASPM PTY DISPLAY
.
To receive an FM stereo transmission:
• Press ST/MONO to select stereo mode and "AUTO" will
be displayed.
Improving poor FM reception:
1 Press ST/MONO repeatedly to select MONO.
This will change the tuner from stereo to mono and usually
improve the reception.

Saving station presets

If you often listen to a particular radio station, it's convenient
to have the receiver store the frequency for easy recall
whenever you want to listen to that station (Preset tuning).
This saves the effort of manually tuning in each time. This unit
can memorize up to 45 stations.
(FM 30 stations/AM 15 stations)
0
DISPLAY FOLDER
TUNE+
ENTER
MEMORY
MENU
/PROGRAM
PRESET VOLUME
TUNE–
+ +
MUTE
– –
DIMMER
 
1 Tune to a station you want to memorize.
See Tuning above for more on this.
2 Press MEMORY/PROGRAM.
The preset number will flash.
3 Press PRESET +/– to select the preset
channel number.
4 Press MEMORY/PROGRAM to store that
station in memory.
If the preset number has changed from flashing to lighting,
before the station is memorised, repeat the operation from
step 2.
• Repeat steps 1 to 4 to set other stations, or to change a
preset station. When a new station is stored in the
memory, the station previously memorised for that
preset channel number will be erased.
Note
• The backup function protects the memorised stations for
a few hours should there be a power failure or the AC
power cord become disconnected.
RANDOM
CLEAR REPEAT
0
DISPLAY FOLDER
TUNE+
ENTER
MEMORY
MENU
/PROGRAM
PRESET VOLUME
TUNE–
+ +
MUTE
– –
08
23
En