Herunterladen Inhalt Inhalt Diese Seite drucken

Scanning Tracks Of A Cd; Pausing Disc Playback; Audio Adjustments; Using Balance Adjustment - Pioneer DEH-1000E Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für DEH-1000E:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 31
Section
02
Operating this unit

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of
each track on the CD.
1
Press FUNCTION to select SCAN.
2
Press a to turn scan play on.
SCAN appears in the display. The first 10 sec-
onds of each track is played.
3
When you find the desired track press
b to turn scan play off.
# If the display has automatically returned to
the playback display, select SCAN again by press-
ing FUNCTION.
# After scanning of a CD is finished, normal
playback of the tracks will begin again.

Pausing disc playback

Pause lets you temporarily stop playback of
the disc.
1
Press FUNCTION to select PAUSE.
2
Press a or b to turn pause on or off.
# To return to the normal display, press
BAND.

Audio Adjustments

Using balance adjustment

Fader/balance setting creates an ideal listen-
ing environment in all occupied seats.
1
Press AUDIO to select FAD.
2
Press a or b to adjust front/rear speak-
er balance.
FAD F15 to FAD R15 is displayed.
# FAD 0 is the proper setting when only two
speakers are used.
3
Press c or d to adjust left/right speaker
balance.
BAL L15 to BAL R15 is displayed.
# To return to the normal display, press BAND.
10
En

Using the equalizer

There are six stored equalizer settings such as
DYNAMIC, VOCAL, NATURAL, CUSTOM,
FLAT and POWERFUL that can easily be re-
called at any time.
! CUSTOM is an adjusted equalizer curve
that you create.
! When FLAT is selected no supplement or
correction is made to the sound.
% Press EQ to select the equalizer.
Press EQ repeatedly to switch between the fol-
lowing equalizers:
DYNAMIC—VOCAL—NATURAL—CUSTOM
—FLAT—POWERFUL

Adjusting equalizer curves

You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in CUSTOM.
Adjusting bass/mid/treble
You can adjust the bass/mid/treble level.
1
Press AUDIO to select BASS/MID/
TREBLE.
2
Press a or b to adjust the level.
+6 to –6 is displayed as the level is increased
or decreased.
# To return to the normal display, press BAND.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1
Press AUDIO to select LOUD.
2
Press a or b to turn loudness on or off.
# You can also turn loudness on or off by press-
ing and holding EQ.
3
Press c or d to select a desired level.
LOW (low)—HI (high)
# To return to the normal display, press BAND.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Deh-1020e

Inhaltsverzeichnis