Manual Tuning; Auto Tuning - Peaq PMS200BT Bedienungsanleitung

TUNER playback
Press MODE and select TUNER.

MANUAL TUNING

Press or
band range of frequency.

AUTO TUNING

1. Press and hold
onds and release the button.
2. The tuner will automatically search the
first station.
3. Repeat the above procedure to select
another station.
SAVING STATIONS
You can store up to 30 FM stations.
1. Once a station is found, press MEMORY
on the remote control.
2. Press
or
select the desired station number.
3. Press MEMORY to confirm the selection.
4. To program more station or to change
the stored preset stations, repeat the
above steps.
PMS200BT_A5_131031_1.indb 41
to tune the desired wave
or for few sec-
on the remote control to
NOTE: Storing a new station into a preset
location will erase the previously stored sta-
tion. Power off will not erase the memory of
preset stations.
SELECT PRESET STATIONS
1. Press on the remote control to
or
select the preset stations.
2. The screen will display the number and
the corresponding frequency.
MONO / STEREO
1. Press MONO/ST. on the remote control
to select MONO or STEREO.
2. When you receive a FM stereo station
the indicator will be displayed
on the screen.
ENGLISH
41
31/10/13 2:54 PM