Peaq PMS200BT Bedienungsanleitung Seite 43

USB/CARD playback
USB
1. Press MODE and select USB.
2. Open the USB SD cover and insert a
USB Stick with MP3/WMA music files.
3. Playback starts automatically and the
first track will be played. If there is no
USB device connected, the message
NO USB will be displayed on the screen.
NOTE: Connect the USB device directly to
the USB port of the unit. Using an extension
cable is not recommended and may cause
interference and failure of data transfer.
This product supports USB 1.1 and 2.0.
Charging external devices
External devices can be charged via USB
with this speaker. Connect the device to the
USB port (output: 5V/ 500mA).
NOTE: USB charging cable is not included
(please use cable provided with your external
device, if any)
SD CARD
1. Press MODE and select CARD.
2. Open the USB SD cover and insert an
SD card with MP3/WMA music files.
PMS200BT_A5_131031_1.indb 43
3. Playback starts automatically and the
first track will be played. If there is no SD
card connected, the message NO CARD
will be displayed on the screen.
REPEAT FUNCTION
Press REPEAT to select the following repeat
modes:
– REPEAT repeat current track
– REPEAT ALL repeat all tracks
– REPEAT ALBUM repeat album
FOLDER SELECTION
Press on the remote control to change
or
the folder.
ID3 OPERATION
1. During MP3/WMA
MEMORY to turn on ID3 operation.
2. TITLE NAME / ARTIST NAME / ALBUM
NAME will be displayed on the screen.
3. Press MEMORY again to turn off ID3
operation.
PLAYBACK LIST
The playback list can only be programmed
in stop mode.
1. Press MODE and select USB or CARD.
2. While in stop mode, press MEMORY,
album number 00 starts flashing.
3. Press on the remote control to
or
select the folder and confirm by pressing
MEMORY.
4. Track number 000 starts flashing.
5. Press or on the remote control to
select the track and confirm by pressing
MEMORY.
6. Up to 64 tracks can be programmed.
7. Press to play the first track of the
program.
CANCEL PLAYBACK LIST
In stop mode, press to cancel the program.
ENGLISH
playback, press
43
31/10/13 2:54 PM