Stop Playback - Peaq PMS200BT Bedienungsanleitung

4. OFF indicator appears on the screen
and hour digits start flashing. Press
or to adjust the hour and confirm by
pressing TIMER.
5. The minute digits start flashing. Press
or to adjust the minute and con-
firm by pressing TIMER.
6. TUNER starts flashing. Press
to select the mode TUNER / CD /
USB or CARD and confirm by pressing
TIMER.
7. VOL starts flashing on the screen. Press
or to adjust the volume and con-
firm by pressing TIMER.
8. The timer is set and the
be displayed on the screen.
NOTE: If TIMER ON and TIMER OFF has the
same time, ERROR will be displayed on the
screen.
SLEEP
Press SLEEP on the remote control to acti-
vate sleep mode.
The indicator and SLEEP 90 will be dis-
played on the screen. Press SLEEP to de-
crease sleep intervals:
– SLEEP 90
– SLEEP 80
– SLEEP 70
– SLEEP 60
– SLEEP 50
– SLEEP 40
– SLEEP 30
– SLEEP 20
– SLEEP 10
– SLEEP OFF
PMS200BT_A5_131031_1.indb 39
indicator will
90 minutes
80 minutes
70 minutes
60 minutes
50 minutes
40 minutes
30 minutes
20 minutes
10 minutes
off
MUTE
or
Press MUTE on the remote control to turn off
the volume temporarily. The volume indicator
starts flashing.
Press MUTE again to deactivate.
PLAY / PAUSE
Press to start or pause the playback. If
the playback is paused, the time elapsed in-
dicator is flashing on the screen.
NOTE: Very high volumes can cause vibra-
tions which could also make the tracks skip.

STOP PLAYBACK

Press to stop the playback.
PREVIOUS /
With or , you can skip tracks to the
next or previous track. By pressing
the track being played will be played back
again from the start. By pressing twice, the
previous title will be played again. By press-
ing , the next track will be played.
ENGLISH
NEXT
once,
39
31/10/13 2:54 PM