Changing The Fan Speed; Setting The Timer; Setting The Humidity Level - Philips HU4816 Benutzerhandbuch

Changing the fan speed

Manual
You can manually select the desired fan
speed.
•
Press the speed button
more times to select the desired
fan speed ( (low), or
(fig. j).
The selected fan speed light goes on.
Tip
• If the desired humidity level is reached,
you can select a lower fan speed.
However, if the desired humidity level is
not reached, you can select a higher fan
speed to humidify the air more quickly.
Sleep mode
In sleep mode, the humidifier operates
quietly with dimmed light for your
undisturbed sleep (fig. k).
1
Press the speed button
more times to select sleep mode. In
sleep mode, only the speed
is on.
2
To change to another fan speed,
simply press the speed button
again.
Note
• Sleep mode only works at speed
• In sleep mode, the red indicator does
not blink, but remains on when the
water level gets low.
• In sleep mode, you can only set the
timer; the humidity level cannot be set,
and the humidity light is off.

Setting the timer

With the timer function, you can let the
humidifier operate for a set number of
hours. When the set time has elapsed,
the humidifier automatically switches
off.
1
once or
(normal) )
2

Setting the humidity level

• Make sure that the water tank is filled
with water before the humidifier
can function (see the chapter
'Getting started' , section 'Prepare for
humidification').
once or
1
light
.
• A comfortable humidity level is from
40%RH to 60%RH. You can choose
the preferred humidity level at 40%RH,
50%RH or 60%RH.
Press the timer button
the timer function (fig. l).
» The corresponding timer light
(1H, 4H or 8H) goes on.
To deactivate the timer function,
press the timer button
until the timer light (1H, 4H or 8H)
turns off.
Note
Press the humidity button
or more times to set the desired
air humidity to 40%RH, 50%RH or
60%RH (fig. m).
» The humidity light (40, 50 or 60)
of the humidity level goes on.
» The humidity indicator light is red
if the desired humidity level is
not reached. The light turns blue
when the desired humidity level
is reached.
Tip
to enable
repeatedly
once
EN 7