Herunterladen Diese Seite drucken

Phonocar 7/434 Montageanleitung Seite 2

Logo-projector

Werbung

beiden Gewinde-Ringen befestigen.
• Localizar la posición, practicar el orificio mediante la corona que se suministra en dotación y a
continuación introducir el proyector. Fijar con los dos anillos roscados.
CONNESSIONI • CONNECTIONS • CONNEXIONS
KABEL-VERBINDUNGEN • CONEXIONES
• Individuare la posizione, praticare il foro tramite la fresa fornita nella
dotazione ed inserire il proiettore. Fissare con i due anelli filettati.
• Determine the installation-position. By means of the delivered cutter,
carry out the fixing-holes. Introduce the Projector and fix it with the
two threaded rings.
• Déterminer la position, faire le trou moyennant la fraise offerte et
insérer le projecteur. Fixer avec les deux anneaux taraudés.
• Installations-Position festlegen. Mit Hilfe der beigelegten Fräse,
Befestigungsbohrungen vornehmen. Projektor einsetzen und mit den
Collegamento alle luci di cortesia.
Connect to courtesy-lights.
Branchement aux lumières de
service.
Anschluss an Absperr-Licht.
Conexión a las luces de cortesía.
Ø Foro
18,5 mm

Werbung

loading