Silvercrest SAK 4000 A1 Bedienungs- Und Sicherheitshinweise Seite 69

Sounds
You can reduce the sensitivity, volume and
brightness by sliding the respective slide bar
to the left.
To increase the sensitivity, volume and bright-
ness, slide the slide bar to the right.
The current setup is shown in percent on the
right next to the slide bar.
Note: Via the
speaker settings)
microphone
3
(shutter, power up and key tones) on and off.
Tap the touch button
LCD touch display
functions on and off by tapping the rele-
vant touch button for the speaker
, microphone
34
, .
23 36
Note: If the relevant symbol is marked
in red, the function is turned off.
With this function you can turn the shutter
sound ("Shutter"), the power up sound
("Power up") and the key sound ("Beep")
on and off.
-touch button (audio / mic /
, , you can turn the
20 33
, speaker and the sound
12
or
20
. You can turn the
5
,
22 35
on the
33
,
21
or sound
GB/IE/NI 69