Initial Use; Charging The Rechargeable Battery - Silvercrest SAK 4000 A1 Bedienungs- Und Sicherheitshinweise

Before use, you must therefore insert a memory card (see chap-
ter "Inserting memory card"). Information about memory card
type can be found in the chapter "Technical data".
Open the battery compartment cover
side and lifting it up.
Insert the rechargeable battery and close the battery compartment
cover again, so that it clicks into place.
11
When inserting the battery, pay attention to the polarity
Ensure that the battery contacts are pointing towards the lens
(also see chapter "Replacing the rechargeable battery").
Fully charge the battery before first use of the product (see chapter
"Charging the rechargeable battery"). The charging time for the
initial charge is approx. 3 hours.

Initial use

Charging the rechargeable battery

The product can only be connected with suitable USB interfaces
(USB 3.0 and higher) (see chapter "Connecting the product to a com-
puter"). Due to high power consumption while charging, the camera's
rechargeable battery can only be charged using a USB 3.0 connec-
tion or higher. Using unsuitable USB interfaces can cause damage to
the USB host.
If you are not sure whether your USB interface is suitable, we recom-
mend removing the micro SD card and using a card reader to transfer
photo and video files.
20 GB/IE/NI
by pushing it to the
11
.
4