Technical Data - Desoutter ERXS Series Bedienungsanleitung

6159939290_14
Original instructions.
© Copyright 2018, Ets Georges Renault 44818
St Herblain, FR
All rights reserved. Any unauthorized use
or copying of the contents or part thereof
is prohibited. This applies in particular to
trademarks, model denominations, part numbers
and drawings. Use only authorized parts. Any
damage or malfunction caused by the use of
unauthorised parts is not covered by Warranty or
Product Liability.
STATEMENT OF USE
Tool (class I) suitable for industrial environment
only. It shall be used for tightening or loosening
joints in wood, metal or plastic material. No other
use will be permitted. For professional use only.

TECHNICAL DATA

● See page 4.
IP rating
Working temperature
Humidity ratio
ERXS tools are ESD (ElectroStatic
Discharge) certified screwdrivers,
according to requirements of IEC 61340-
5-1 standard.
Declaration of noise and vibration emission
● See page 65
Vibrations level.
Sounds level.
a , a : Vibration levels.
hd h
K / KpA = KWA = 3 dB: Uncertainty.
LpA: Sound pressure level.
LWA: Sound power level.
All values are current as of the date of this
publication. For the latest information please visit
desouttertools.com.
These declared values were obtained by
laboratory type testing in accordance with the
stated standards and are suitable for comparison
with the declared values of other tools tested
in accordance with the same standards. These
declared values are not adequate for use in risk
assessments and values measured in individual
work places may be higher. The actual exposure
values and risk of harm experienced by an
individual user are unique and depend upon
the way the user works, the workpiece and the
workstation design, as well upon the exposure
time and the physical condition of the user.
We, Desoutter, cannot be held liable for the
consequences of using the declared values,
instead of values reflecting the actual exposure,
in an individual risk assessment in a work place
situation over which we have no control.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
An EU guide to managing hand-arm vibration can
be found by accessing http://www.pneurop.eu/
index.php and selecting 'Tools' then 'Legislation'.
We recommend a programme of health
surveillance to detect early symptoms which
may relate to noise or vibration exposure, so that
management procedures can be modified to help
prevent future impairment.
INSTALLATION
● See page 8.
A
1. Output
2. Direction selector
3. LEDs
40
4. Connector
0 / +40°C
5. Trigger
0 / 90%
6. Vacuum port
B
1. Red
2. Green
3. Yellow
4. Blue
SET UP
LEDs, Push start
These tool features are programmable in the
controller.
● Refer to the CVI XS controller user manual
part number 6159939280 at http://resource-
center.desouttertools.com.
Tightening cycles
ERXS screwdrivers are to be used with Desoutter
CVI XS controllers only.
● Connect the tool to the power supply by
means of the controller.
● To program the controller, refer to the CVI XS
user manual.
10 / 68
TOOL DESCRIPTION
LEDS COLOR CODE
The tool cable is delivered in a separate
box. Please ensure you have well
received this box and check the content.
English
05/2019