INTERTECHNO ITKL-30 Bedienungsanleitung Seite 28

GB
Individual switching:
The wireless pocket scene transmitter can be used for all types of
intertechno self-learning wireless receivers.
For switching on and off lights, dimming lights, operating blinds and
garage doors etc...
1 random code out of 67 million possible codes guarantees a high level
of security.
Scene switching: (Fig. 1)
Multiple wireless receivers can be changed to the desired switching state
with the touch of a single button.
3 scenes can be selected.
Wireless receivers with storage are required for scene
switching!
Coding: Teaching in wireless receivers Fig. 2
To adjust the encoding, please also read the operating instructions of
your self-learning wireless receiver.
Place the wireless pocket scene transmitter near the wireless receiver.
1.) Open the transmitter using a flat-head screwdriver.
2.) Remove the battery safety strips.
3.) Move the slider to position 1.
4.) Put the wireless receiver in learn mode.
5.) By pressing the transmitter once, the ON signal is transmitted (the
LED will light up green) and the wireless receiver takes over the
encoding.
One more receiver can be taught in.
Now one or more wireless receivers can be switched on by pressing a
button. The LED will light up green when ON.
By pressing a second time, the off signal will be transmitted and the LED
will light up red 2x.
If using a radio dimmer, press and hold the transmitter until the desired
brightness has been reached.
The LED will flash green during this process.
If no scene switching is required, the settings are now complete!
Operating instructions
ITKL-30
3
›