Specifications - Makita BCS550 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Red part
1-2. Button
1-3. Battery cartridge
2-1. Lever
3-1. A position
3-2. Cutting line
3-3. Base
4-1. Switch trigger
4-2. Lock-off lever
5-1. Lamp

SPECIFICATIONS

Max. Cutting depth
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for cutting in mild steel and
aluminum only with appropriate saw blades.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : cutting steel pipe
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Explanation of general view
6-1. Shaft lock
6-2. Hex wrench
7-1. Hex bolt
7-2. Outer flange
7-3. Saw blade
7-4. Inner flange
7-5. Cup washer
8-1. Hex wrench
9-1. Front grip
9-2. Rear handle
Model
Blade diameter
-1
)
Overall length
Net weight
Rated voltage
) : 101 dB(A)
pA
) : 112 dB(A)
WA
value (tri-axial vector
2
) : 3.0 m/s
h
2
ENE066-1
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
ENG102-3
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
ENG235-1
machine(s):
Designation of Machine:
sum)
Cordless Metal Cutter
Model No./ Type: BCS550
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
ENG901-1
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
3
9-3. Base
10-1. Cutting line
10-2. Base
10-3. Sight grooves
11-1. Clamping screw
11-2. Rip fence (Guide rule)
12-1. Limit mark
13-1. Brush holder cap
13-2. Screwdriver
BCS550
136 mm
51 mm
3,600
348 mm
2.6 kg
D.C. 18V
Corporation as the
ENH101-13
responsible