Cellular Line INTERPHONE Bedienungsanleitungen Seite 30

INTERPHONE
GB
ACTIVATING THE LOW VOLUME
If the headset (7) is very near your ear, you can lower the basic level by
enabling this function.
METHOD
1. When the device is off (LED 2 off) press and hold down the Volume
– button (4),
2. While holding down button (4), press the multifunctional button (1)
for five seconds.
3. You will hear a sound that means the device is on and the LED (2)
will flash blue. After about 5 seconds you will hear another confir-
mation sound and the LED (2) will flash red/blue to confirm the
LOW VOLUME setting.
4. Release the buttons
VOX VOICE ACTIVATED ANSWERING
When this function is enabled, just say one word within ten seconds
(for example, HELLO) to answer a call. If no sound is emitted within
this time, the call will automatically be rejected.
If the VOX function is not enabled, press the multifunctional button (1)
to answer. To reject the call, press and hold down the multifunctional
button (1) for two seconds, two sounds will be emitted to confirm the
end of the call.
ACTIVATION
1. When the device is off (LED 2 off) press and hold down the Volume
+ (3) and the Volume – (4) buttons.
2. Hold down buttons (3) and (4) and press multifunctional button
MFB1 for five seconds.
3. You will hear a high-pitched tone and the LED (2) will flash red/blue
to confirm the setting.
4. Release the 3 buttons.
DEACTIVATION
1. When the device is off (LED 2 off) press and hold down the Volume
+ (3) and the Volume - (4) buttons.
2. Hold down buttons (3) and (4) and press the multifunctional button
(1) for five seconds.
3. You will hear a low sound and the LED (2) will flash red/blue to con-
firm the setting.
4. Release the 3 buttons.
24